The Balance of Prose

By Millie Florence

Prose is the cinematography of writing. It exists not just to capture what happens in your manuscript, but to capture it in a way that shows off your story to the best possible degree. Just as the angle and lighting of each shot are important in filmmaking, so are the words and sentences we use in writing, and how and where we use them.

Often, among beginning writers, you will find two main ways where people go wrong with prose.

Minimalists & Maximalists

You have the minimalists, who have a vision in their head and see words as the vehicle to getting that vision out so that other people can experience it, so they use few and simple words to get that story out as quickly as possible. They may have an incredible story to tell, but their ‘get it done’ use of language often undermines what could have been impactful story moments.

Then there are the maximalists. They love the sound of words on their tongue, the look of them on the page and is a must-have website for them. Why say blue when you could say cerulean? Or walk, when you could say caper? Shouldn’t prose be poetry, and every word lovely? They’re flowery use of language often overpowers the story they are trying to tell, like doubling the sugar in a cake because you like sweet things.

This isn’t to say that minimalism or maximalism, in the right moments, isn’t a perfectly valid style of writing, I’ll talk about that later, but it should come from trying to achieve a certain effect at a certain moment rather than being your default. Both are unbalanced approaches to writing prose, and I would like to correct them both. You need a mix of both flowery and simple language to create good prose.

But, why? Well, let’s start by untangling a couple of myths.

I’m guilty of being a maximalist myself, so I can say this for certain – maximalists are not often told to do less. This is why it took me a while to realize that I needed to tone some things down in my writing (thankfully, I figured this out before I published my first book). Why? Because, especially when you’re young, teachers and readers are impressed by high vocabulary and complex sentence structure, and you are encouraged to continue with it. Thus, young writers like me often come under the delusion that high vocabulary, complex sentences, and extreme phrases equate to good writing. As an effect of this, minimalists are far more likely to realize that there are problems with their writing, but they are just as unlikely to fix them because they are also told that using ‘more interesting words’ makes for better prose.

Okay, but why doesn’t this work? After all, isn’t it proven that people with larger vocabularies get better jobs? Don’t you sound smarter when you use larger words? True, but it isn’t just knowing big words, but knowing when to use them that counts. Just because you can doesn’t mean you should.

How do you know when to use them? There are several contributing factors to this, all of which I will go over. Style, context, and rhythm.


Since rhythm is one of the most underlying and essential, let’s start with that.

Rhythm: The effect produced in a play, film, novel, etc., by the combination or arrangement of formal elements, as of length of scenes, speech, and description, timing, or recurrent themes, to create movement, tension, and emotional value in the development of the plot.

Every part of the story has rhythm, as you can see in the above definition, however, we are only focusing on the part it plays in prose. So what is the rhythm of prose? Usually, when we think of rhythm, we think of the kind in music; the number of beats. Well, just like music, prose has beats. You can usually hear them when you say a sentence aloud. Take a look at the example below, an excerpt from my most recent publication, Lydia Green of Mulberry Glen.

The purple drapes swished closed behind her, the skirt of a surprised dancer swished away before her, and across the ballroom, her eyes just caught the dark train of Zamilla’s black hair as it snapped around the ballroom door frame and out into the night.

Read that aloud. Do you feel a little breathless? That’s because of two things: sentence length, and word choice. Lengthy sentences naturally take longer to read than short ones, and that fact, combined with simple, easy words in an intense moment of the story, gives the reader a breathless sense. Their eyes fly quickly over simple words while trying to keep up with the structure of the sentence’s length, meaning that they’ve just crossed over a lot of information in a relatively short period. If I used more interesting or significant words, the very intrigue of them would slow the reader down, producing a warbling effect, because they would focus more on individual words than the sentence as a whole. Like this.

The mauve drapes swept closed behind her, the pastel skirt of an astonished dancer swept away before her, and far across the ballroom, her eyes just caught the ink-black train of Zamilla’s hair as it snapped around the ballroom’s entrance and out into the depths of the night.

While this is an interesting style that could be used in a different scene, it isn’t what I wanted in this instance. Using unusual or interesting words is like using a highlighter – it draws immediate attention from the reader. This is why being a maximalist doesn’t work – you essentially highlight the entire story, and when everything is important, nothing is, and the reader doesn’t know what to focus on.

However, there are times when you should use the maximalist approach in prose. Let’s look at this paragraph below.

Far below they could see the outlines of tiny cottages dotting the green fields, the scruffy fringes of woods against the smooth grassy expanses, and a long blue river winding the length of it all as if someone had carelessly dropped a coil of blue silk to fall over the hills and between the trees. Here and there, fountains, towers, pavilions, and gazebos made of white stone could be spotted in the light of hanging lanterns. Far on the other side of the Valley, standing alone, was the solemn figure of an ancient stone tower. It gazed out over the great windswept Valley like a faithful guardian.

This example has much longer, more complex sentences and flowery language. Why? Because that kind of language slows the reader down, it makes them pause and think, linger in this moment, soak in the sights and sounds and smells. And that’s what I wanted in this part of my book, because we had just come upon a new setting where the characters were going to spend a lot of their time, and I wanted to introduce it thoughtfully and gently.

The point of this is that the rhythm of your writing contributes to the story itself, it creates an experience for the reader. Sentences with different structures, different lengths, different word choices, do different things in the reader’s head. You need to think carefully through them all. It’s all about the effect you want to achieve.

When should you use rhythm? Rhythm is always going to be there whether you know it or not, so you should always be aware of it and use it to your advantage. What does this mean for minimalists and maximalists?

Minimalists need to be more aware of the impact each word they choose has, and put a little more thought into sentence length and structure to use them to their best advantage. Maximalists need to realize that interesting words and lovely sounding sentences can often compromise their rhythm.


Context: the set of circumstances or facts that surround a particular event, situation, etc.

Take this example.

Lydia wasn’t thinking. Or listening. Or looking for paper stars.

Taken out of context this makes no sense, but when you know that Lydia is in the middle of a magical library that you can easily get lost in, and has been dropping paper stars behind her to mark her way through it, a sentence like this can make your stomach drop. It’s the setup, not the content that makes this sentence a good one. It’s the same reason that the words “We are Groot” at the ending of guardians of a galaxy hold such weight. It’s the power of ‘if you know, you know.’

I could have said:

Lydia wasn’t thinking. The library loomed up about her, and shelves twisted and turned around her, and then the way out was no more.

But it doesn’t hold the same weight, even if it’s well written. You can use grand words and polish your sentence until they gleam, but there’s nothing quite like the pay-off of context.

When should you use context? When you have a good mechanism like paper stars. When the moment is emotionally charged. When there’s humor or irony in it. When it would sound most natural for the character to express their feelings in a simple way referencing something in the past rather than making long speeches about it.

What does this mean for minimalists and maximalists?

Context is a great way for minimalists to make their writing shine without too much effort. Maximalists need to realize that sometimes less is more. Not always, but sometimes.


Style: a particular kind, sort, or type, as with reference to form, appearance, or character.

Style is kind of the disclaimer of all writing advice. Poetic license. This is how authors are allowed to get away with pretty much anything. So why do people read posts like this anyway, if it’s all about style?

In the words of Picasso, “Learn the rules like a pro, so you can break them like an artist.”

I am all about breaking the rules as an artist, but there are a few things I believe you need to take into consideration when you break the rules. 1. Is it intentional? 2. Is it effective?

I used some passive voice in my most recent book, which is usually a huge NO among writers. Why? Because I wanted to achieve the aesthetic of a classic fairy tale, and a lot of old and classic books use passive voice. I was very careful to only use it just enough to get that style across, however, and seared clear of it during moments like action sequences so that it would achieve the desired effect without compromising the story I was trying to tell.

But I know there are probably some maximalists and minimalists arguing right now. What if I want my story to have that slow ethereal maximalist’s feeling to it? That’s just my style. What if I want my story to have a gritty quick minimalist’s feeling to it? That’s just my style. And that’s fair! To each his own. However, there is something you should consider, and that’s the suspension of disbelief. When a reader opens your book, you set the stage for them, whatever style of the stage that is, and they suspend their disbelief, seeing everything through the lens of that story with that style.

Whether you show them a world that is gritty or ethereal, they will see that
throughout the story, and their imagination will start to fill in the blanks. You don’t have to constantly bombard them with the aesthetic of your world because they’ve already got it. That’s the magic of fiction. Thus, once they’ve suspended their disbelief, you can take some liberties. Soft, thoughtful, ethereal fantasies can still have moments where the rhythm is quickened or context is all you need. Gritty action-packed thrillers can still have thorough description and slower moments. Because the readers will place all of that on top of the foundation you’ve already laid for them.

When should you use style? When you need the reader to suspend their disbelief. When it’s intentional and effective. When it lifts the story up rather than dragging it down.

What does this mean for minimalists and maximalists?

Yes, choose your unique style and enjoy it! But don’t let style compromise Story, because it should be the Story that takes center stage, with the style of your prose showing it off to the best advantage.

Balance is one of the hardest things to achieve, both in life and in writing, but it’s worth it. Prose is the cinematography of writing, so lights, keyboard, action!

Millie Florence is an adventurous homeschooler who published her first book at age 13. She loves sushi, zip lines, and just about all things yellow. Millie lives in a picturesque blue house in the woods with her parents and her four siblings, and a varying amount of cats and chickens. Whenever you need a good excuse not to clean your room, you can visit her online at, on Instagram, Facebook, or on her Youtube Channel. Check out her books Honey Butter and Lydia Green of Mulberry Glen.


GRACE FALLS – New Release from G.A. Finocchiaro!

Writing Bloc is pleased to announce our second full-length single-author work! GRACE FALLS was produced under the Identity Crisis Books imprint, which is managed by Head of Editing Cari Dubiel. We were so pleased to work with G.A. Finocchiaro on this collection of short works, all set in the small town of Grace Falls, Pennsylvania, where Lovecraft meets Stranger Things.

We talked with Finocchiaro about his book, the process of writing it, and what is coming next.

Tell us about GRACE FALLS and how it came to be. What was your inspiration?

GRACE FALLS started out as an idea to grow the mythology of the world I was creating. I was inspired by the way Stephen King connected his worlds together, and I wanted to do the same with the way he wrote the town of Derry. I love how he, and his son Joe Hill, winked at the reader with subtle hints as to the larger scope of the events taking place. With that mythology in mind, I wanted to write a bunch of short stories that were fun, creepy, and allowed me to pay homage to my favorite episodes of Twilight Zone, Amazing Stories, Tales from the Darkside, Tales from the Crypt, and more. 
I grew up in a small town, and there was always that creepy house, or that strange place that stirred rumors. Small towns have this way of creating their own mythologies because of their isolation. So I drew a lot of inspiration from my own childhood.

How are the stories linked together, and how do they fit into the greater universe of your work?

The outcomes of the individual stories bleed into each other through the characters and events over the course of one calendar year in Grace Falls. Sometimes it’s merely a suggestion that a character was there, and other times it’s through the direct outcome of the previous story. Every event is connected in some way, and those willing to dive in should be able to pick up on connections between each story within this anthology, as well as to my first book, The Knightmares

This town and its inhabitants are at the center of a mystery that will ripple outward into every story I write. Their lives and histories will set up the overall mythology for everything that happens across all of my books. I was always fascinated with World War I, and how there were many events that led to the outbreak of war. That’s how I see my novels—each story building up to a breaking point.

“Mum,” the first story in GRACE FALLS, will ultimately be the start of the chaos within the book, but it is only a symptom of a greater threat to the town and its people. And as you finish the book with “Extraordinary,” you’ll get a small glimpse at the cosmic levels of danger involved. The stories in between, in particular “Breacher” and “Pajamas,” have a direct connection as they share the same, literal, back yard. “Cubicle 43-B” is the most isolated story, but its protagonist has direct influence on the life of the characters in “Extraordinary.” However, the best thread throughout the anthology comes in the form of its mysterious villain… but I won’t give away the fun.  

What’s your writing routine like? Are you a plotter or a pantser?

I’m actually somewhere in between. I usually plot out all my chapters, but then I find that the narrative or a character’s arc organically should go a different direction, and I adjust. I also end up with a ton of notes, adding and subtracting things, throughout the course of writing my drafts. I view writing a lot like sculpting from a piece of rock. Everything starts with a large whole, and as a writer I slowly whittle it away, refining, until I have something I like. 

Your book is set in the 80s. How did you choose this timeframe? What did you research to make sure the setting was accurate?

Pop culture exploded in the 80s. I love that era, growing up, and look back fondly on it. It was a super weird decade filled with some of the most fascinating movies and music we have ever seen as a culture. To pay homage to the things that made me into who I am begins back then with The Monster Squad, Goonies, The Last Starfighter, and more. I wanted to tell stories about innocence versus darkness like the heroes of my youth. 

What are you working on next?

I am currently working on a 4-part story (tentatively) that takes place, in part, within Grace Falls and includes some of its many characters I established within this current book. The series as a whole is called Cataclysm, for now, and is separated into these four titles:

  1. The Raptor
  2. The Omega
  3. The Two-Eyed Man
  4. Cataclysm

The story is a love story set against horrific events, both fantastic and real-life. I like to say it’s a cross between 13 Reasons WhyThe Crow, and Clash of the Titans. This story will expand upon the characters of Grace Falls. 

Fearless Self-Publishing Lists podcast Writing Help Writing Life

Writing in the Time of Corona: Resources

We wanted to create a resource list for all of the writers out there who are needing to redefine routines during these stressful and unfamiliar times. Becca Spence Dobias and Jacqui Castle jumped on an impromptu brainstorming podcast, which you can listen to here.

Below are a few of the resources mentioned, and we will also be adding to this list every time someone brings another resource to our attention. If you have something you want to add, either tag us on twitter – @writing_bloc – or shoot an email to [email protected]

We hope these resources prove useful, and remember that we are here to support the writing community in any way that we can.

Free Resources

Low-Cost Resources

  • Masterclass. Access to all of the resources on Masterclass starts at $15 a month. You can read some of our masterclass reviews here.
  • Online Tools for Learning a New Skill Resource list on All Connect “With many people looking to fill up their new-found free time productively, we created a resource that highlights the top sites and apps people can use to learn a new skill. From writing to photography, we outline which tools are the best to use as well as any deals or freebies on these classes.” – Communications Coordinator at

*This list will be updated frequently. Check back for more.


8 Places Close to Home to Promote Your Writing

by Hunter Liguore

Creating a homegrown presence for your writing can begin right in your own neighborhood and town, giving you immediate opportunities to connect with readers. When I think ‘homegrown,’ I think local, and local, for me, means accessible and reachable. Those are the benefits I tout when I’m marketing myself to local businesses. 

Getting Started

Where can you start to look for venues to support your homegrown writing? I initially started on my own street by dropping off a weekly poem and invite in my neighbors’ mailboxes, which led to a summer barbecue on my front lawn that everyone was invited to. Come to find out, I wasn’t the only poet on the street. 

Although the barbecue didn’t spawn instant fame or a year’s worth of sales, it did start the beginning of a small group of readers interested in my work. Every connection is one step closer to a future where you are living your dream as a writer. The following is a list of local places to begin marketing your work and most of all you!

1. The Farmer’s Market

The farmer’s market was the first place I sought out to give readings to showcase my work. They usually occur in the center of town, weekly, and throughout the summer. You can build a following just by showing up every week. There is usually some kind of entertainment, like a band, and if there isn’t, you can suggest it to the people organizing it, by asking if they wouldn’t mind if you read some poetry/short pieces to people shopping. Most organizers are more than happy to have you. You’ll need a small amp and mic, which can be acquired pretty inexpensively from a local music store. (You might use it at some of these other places too.)

2. Historical Societies

Historical societies come in all shapes and sizes. They range from really tiny (as in you might even drive past it it’s so small) to being quite big, with a huge following. In either case, historical societies are usually equipped to offer events and have a ready membership and mailing list. If you can locate a historical society for an author, even better. If your historical society doesn’t offer readings, ask to organize one specifically for local authors, yourself included. 

3. The Library

The library is the town’s hub for readers. Get in touch with those in charge of buying books and make sure to let them know poetry is important to acquire, including your own homegrown collections. Once your books are in stock, talk to the special events coordinator about arranging a reading or writing workshop. Both can go a long way in promoting your work. Be consistent and schedule events consistently to build readership and visibility. 

4. Local Races

Depending on where you live, your town, or those nearby, should offer marathons or races regularly. Races attract a group of runners that often go town to town to compete. Most events also include vendors that give away product samples and information. Because the races are public, you can show up with your mic and work, and share them with a ready audience. (Check to see if you need a permit from the town first). At the least, you can hand out business cards and writing samples. 

5. Churches, Occult Shops

Churches have become a source for entertainment and often have musicians, speakers, and authors perform. Often a paying opportunity, check your local newspaper for area events at local churches or temples to see which ones might be interested in a performance reading. Equally, your local occult shop or coven might also have reading opportunities. For instance, around Halloween, I bring out all my trick-or-treat-related writing to reach new readers; the store will usually carry your books for the month of October, leading to the event.  

6. Natural Foods Stores

Most towns have a natural foods market that caters to local products and farms. I approach the owner/manager with my story of how great it would be to carry some homegrown writing on consignment. If the store has a café of any kind, I will do a giveaway for all those who attend—usually a sample of my work bound up in a one-of-a-kind chapbook and a free coffee. 

7. Restaurants/Bars

Restaurants and bars are always looking for entertainment. If your local restaurant is booking musicians on Friday and Saturday nights, then ask if they’d be willing to showcase poetry on a Monday or Tuesday night. I often solicit establishments early in the year and try to schedule gigs around President’s Day, Martin Luther King Day or Valentine’s Day; the work I showcase is themed to the holiday. Just like a band, I read ‘cover-tunes’ from the classics, adding in a hit of my own and hope for an encore!

8. Nature Centers/Animal Shelters

Nature centers and animal shelters cater to a clientele with interests in the environment, animals, nature, walking, and recreation. They also usually have an education department that offers a variety of events or classes to the public. You might arrange a walking tour centered around nature writing or a similar workshop showcasing your work alongside the participants. 

Be Creative

Being homegrown means interacting and getting to know your neighbors. People will start to recognize you, especially if you give them something to remember. Before long, you’ll have people coming up to you asking, “Hey, aren’t you that local author?” Then you know you’re on your way!

Hunter Liguore (she/her) teaches social justice writing at Lesley University. An award-winning author, her work has appeared in multiple publications internationally. Her cli-fi novella, L’Ultimo Polare was translated and published for readers in Italy.. She is ‘writing for the next generation of readers who care about the world.’ For more, visit:

Fearless Self-Publishing Guest Post Self-Publishing Software Review Uncategorized Writing Help Writing Life

A Writer’s Guide to InDesign

By Kaytalin Platt – Cross-posted on Kaytalin’s website here!

I created the Author’s Guide to Typesetting in InDesign for authors who want a little more control over their book’s interior layout. InDesign can seem like a daunting program. There are a lot of tools and features, and many of which you won’t need for typesetting or layout. In this article, I’ll give you a step-by-step, start-to-finish guide on how to publish your book with a custom-designed feel. We’ll discuss creating a document, creating the rules which will govern your document, laying out text, and exporting for print.

InDesign is the leading program professionals use for book layout and production. It’s complex features make for high customization and professional quality. Mastering the program can give you a leg up in production and save you money.

Note: Before starting your typesetting in InDesign, you should have completed all rounds of editing in your Word document. Your manuscript should be as close to perfect as possible before laying it out in book form. 

Working with a Template

Amazon doesn’t offer InDesign templates, but they do offer Microsoft Word templates. This has to do with the fact a lot of people don’t have access to InDesign or know how to use it. You can, however, still layout your book in InDesign and upload it to KDP.  

For the purpose of this article, I created a template for myself using the methods I’ll outline below. I’m making it available for anyone who would like to use it as a branching off point to create their own. 

Tools of the Trade

As I mentioned, InDesign has a variety of options you can use to build out your document. These are separated on either side of the screen. We have Left Screen Tools (located on the left side of InDesign) and Right Screen Tools (on the right side of InDesign). You can add more tools to the Right Screen by going to the Window dropdown in InDesign’s menu bar. 

Left Screen Tools:

The basic tools you’ll need for working on novel layouts are below. If you hover over the tools, their names will appear. These are in order from top to bottom on the tools panel, but I’m excluding a few you might not necessarily need for your project.

  • Select Tool – Selects an object or group.
  • Direct Select Tool – Selects a single object within a group.
  • Type Tool – Creates text boxes, highlights text.
  • Line Tool – Create lines to add interesting elements to your page.
  • Rectangle Frame Tool – Creates boxes you can place images into.
  • Free Transform Tool – Changes the size of objects
  • Color Fill – Changes the color of objects. To change text, select the text box with the Select Tool, and click the T beneath the Color Fill section. This will allow you to change the text color. Another way to do this is to Select All the text, and change the color using the Color Fill box. 

Right Screen Tools:

If you look at the menu bar running across the top of InDesign (following along behind File, Edit, Layout, etc), and select Window, it gives you a variety of tools to add to your workspace. You also have the ability to select pre-organized Workspaces. 

I, myself, work in Essentials Classic. But, there are other options. You may wish to work in the Book workspace, but, for the sake of this article, everything I’m describing is found by navigating using Essentials Classic.

Right Screen Tools you’ll need:

  • Pages – You will have a LOT of pages in your book. This is a compact way of viewing and organizing them. The Pages panel also allows you to create Master Pages, which you can style and apply to hundreds of pages at a time, without having to add elements to each individual page. This becomes handy very quickly, and we’ll go into more detail on this feature later. 
  • Layers – You may not use this very much, especially if you’re utilizing the Master Pages feature. It allows you to put elements on different layers and turn them on or off. This feature is especially nice for placing a Template on an InDesign page and hiding it away periodically as you work. 
  • Links – Any images you add to the document will be found here, in list form. It allows you to see, at a glance, any altered or missing links you might have. An altered linked (signaled by a yellow warning triangle) means you’ve edited an image and haven’t re-synced it with InDesign. To fix this, double click on the yellow triangle. A missing link (signaled by a red circle and white question mark) means the image you placed in InDesign no longer exists in the folder you got it from. If you don’t fix missing link issues, you’ll have pixelated images when you go to print. To fix a missing link issue, you must put it back in the original folder, or replace it in your file from the new location. You can also click the “chain” symbol to re-link manually to the new folder.
  • Stroke – Allows you to adjust the thickness or style of the line you’ve created. You adjust the color of the Stroke in the Fill Tool section on the left. Click the hollow box behind the Fill Tool solid color and it will let you access the stroke color fill options. 
  • Swatches – Quickly access commonly used colors or colors you’ve saved as swatches. 
  • Effects – Adjust transparency, create drop shadows and other stylistic changes to objects. 
  • Character – Select your font, style, character size, spacing between lines, and more in this section. 
  • Paragraph – Adjust your paragraph text to left, right, centered, or justified.
  • Glyph  allows you to add special characters into your text. I usually manually add this tool through the Windows dropdown at the top of the program.
  • Text Wrap – allows you to adjust your text around any images you may have added. 

Creating a New Document

Depending on which version you have, your document setup screen may look a bit different. I work on InDesign CC at work and InDesign 6 at home (probably soon to change now that I’ve updated to IOS Catalina -_-). 

When you select File → New → Document, the New Document screen pops up. 

Width & Height

In the Width and Height area, you might see numbers displayed a bit… odd (unless your version of InDesign is already set to inches instead of picas). Change the unit of measurement to Inches. If you’re in America, you’re probably more used to working in inches. 

The most common indie published book is 6×9. For the purpose of this tutorial, this is the measurement I’ll be using. You’ll want to set your document to 6” wide by 9” tall. But, don’t get carried away and click Create. We need to setup your margins and bleed. 


Margin can be tricky, depending on the thickness of your book. You may want a wider margin for super hefty tomes. But, for the typical 6×9 book, you can use these measurements below.

  • Top Margin: 0.875” or 1”
  • Outside margin: 0.625” 
  • Bottom margin: 0.875”
  • Interior margin: 0.75” or 0.875”


Bleed is the term used to describe the content that flows off the edge of the page. You may not need this feature, but set it up anyway. You’ll want to export your document with bleed settings at the end of this tutorial. 

Most people suggest 0.125” all around for bleed, but I like a lot of bleed. I usually set mine to 0.25” all around. Better safe than sorry.

Once you’ve adjusted your margin, and added your bleed, you’re ready to hit “Create”. 

Building out your Template

After creating your document, you’ll set all the rules the document will live by. This will help you streamline your layout process and save yourself time-consuming edits later. 

Take a moment to think about how you want the interior of your book to look. Grab a few books off your shelf and flip through them, maybe use one as a guide in setting up your design. 

  1. Once you know how you want the inside of your book to look, go to InDesign and select the Pages tab on the right side of the screen. It’s the first tab, and looks like two pages side-by-side.

The Pages tab is divided into two sections. In the first section, you’ll see a list  of two items: [None] and A-Master. Beneath that, you’ll see a single page, which is the first page of your document. At the bottom of the panel, right to left, you’ll see the trash bin icon (to delete pages), a + icon (to add pages), and an overlapping vertical and horizontal pages icon (change paper size icon). 

  1. Let’s go ahead and add some pages to our document. There are two ways to do this. The long way is to repeatedly click the + icon. But, our document will require a lot of pages, so right click on the gray area within your Pages tab, next to your one, lonely page
  2. Select Insert Pages and enter the amount of pages you need besides the one(s) you already have. Don’t worry, you can always add or delete pages later. If you’re unsure how many pages you’ll need, take your manuscript word document and multiply the page count by 2. This will get you close.
  3. After adding pages, go to the area above the page list, where it says [None] and A-Master. Right click on the area beneath A-Master.
  4. Select “New Master”. Hit Ok.
  5. Once your new master page is created (should say B-Master, but you can name it whatever you want), double click on B-Master. This will take you inside the master page, and allow you to edit it. 

Why are we editing B-Master instead of A-MasterA-Master is going to control the part of our document which should be void of stylistic elements like page numbers, title, or author name. A-Master is for the places you need blank pages, where you’ll be custom adding information, like the copyright text, dedication, and title page. 

B-Master Page Design

I like to add the stylistic elements which will carry through a majority of the book to the B-Master pages. Here, I’ll add my page numbers, title, author name, etc. 

Build out your B-Master how you’d like. Choose the font you want for your whole document, or use something a little different for this section. Be mindful of font and element sizing. I recommend going on the smaller side (but not too small) for these elements. Make it readable, but not distracting. 

Page Numbers

How to add page numbers to your document. 

  1. Create a text box using the Type Tool.
  2. Add a letter or number, it doesn’t matter which or what.
  3. Highlight the letter or number you’ve created, then go to the Type dropdown menu at the top of InDesign.
  4. Select Insert Special Character → Markers → Current Page Number

You should do this for both the left page and right pages. You won’t see a page number. That’s okay. This is just a rule you’re setting for these text boxes which will apply to all the pages you connect to B-Master.

Page Layout

Once you’ve created your B-Master page design, you’ll set it aside for right now. Click out of it by double clicking the first page of your actual document in the Pages tab. This will take you to the live section of your document. 

Use the Type Tool to do a rough organization of pages. Just create small text boxes for each page and write what will go on that page. You’ll typically need:

  • Title Page
  • Copyright Page
  • Dedication Page
  • Table of Contents (if applicable)
  • Acknowledgements (if you want them in the front, typically go in the back)
  • Chapter 1

When you reach the first page of Chapter 1, go back to your Pages tab on the right. 

  1. Select the first page of Chapter 1, and all the remaining pages beyond it.
  2. Once they’re all highlighted blue, right click on one, and select Apply Master to Pages
  3. Select B-Master.
  4. Click OK. 

Now, the B-Master design you created earlier has been applied to all appropriate pages. 

Take a look at the first page of Chapter 1. You’ll notice Chapter 1’s page number doesn’t start with Page 1 (as it should). Don’t worry. We’ll fix this later. For right now, we need to decide how the text should be styled—type size, line spacing, font, etc. 

Text Styling


The font you choose is extremely important. Different fonts work for different jobs. A serif font (fonts with little wedge feet) are best for print because they are the easiest to read. You rarely want to use san-serif fonts for novels. 

San-serif fonts work best for digital platforms like websites or mobile devices (but not e-readers). Choose your serif font wisely, but don’t go crazy. Sometimes the best choice is the most common one. I’m particularly fond of Georgia, Garamond, and Lora.

Font Size

Font size is crucial. Too small, and it’s hard for the reader to see. Too large, and you’re wasting space in your book (and it can seem unprofessional). My design professor used to say anything over 11pts was for geriatric people, and would be considered that on viewing. So, I usually like to stick to sizing fonts between 9pts and 11pts, depending on what font I’m using. 

Different fonts appear in different sizes. With Georgia 11pts and Garamond 11pts, one can appear larger than the other. The best way to judge the appropriate font size for your chosen font is to create a test page to gauge varying sizes and line spacing.

Let’s do that. 

Creating Test Page

I’m going to ask you to do this in InDesign and not in Word. InDesign and Word treat fonts differently, and, as you’ll be typesetting in InDesign, you’ll want to test your fonts there.

  1. Go to your Chapter 1 page. 
  2. Create a text box that stays within your pink margin box. 
  3. Pull a short paragraph from your story, one or two sentences or one long sentence.
  4. Paste it into the box. 
  5. Add a line of text above it which says [Insert Font Choice] Size 9
  6. Select your pasted text. 
  7. Change it to your font of choice using the Character tab on the right side of InDesign (A icon). 
  8. Then, change the font size to 9. 
  9. Choose line height (directly right of font size). Adjust until it looks good to you. 

For example, I chose Georgia as my font, and set the font size to 9pt and spacing to 13pt.

  1. Once you’ve made your selections, copy all the text from the Font Choice + Size title, down to the end of your paragraph. 
  2. Paste the copied text 3 times beneath your styled paragraph. 
  3. Now, for each copied paragraph, go up a font size and spacing. (10pt/14pt, 11pt/15pt, 12pt/16pt). Be sure to keep track of your chosen size and spacing in the title above each paragraph. This way, you’ll know what you’re looking at when you print. When you’re finished, you should have 4 different sets of paragraphs at different sizes and line spacing. 
  4. Print this page out. (ctrl+p) Select range of pages and enter the page number of your font test page. 
  5. Hit print. 

Once printed, sit down with it. Have a look. Analyze the sizes. Find a font size and spacing you think works best for your size book and audience. You’ll use that font size and spacing going forward.

Go back to your document and paste a page of text into the text box you were using. Style it with your chosen font, size, and line height. Now, play with the line spacing. Adding, subtracting, until you find the look you want.

Having a good amount of line spacing between sentences is nice. It doesn’t make the reader feel crowded and lets the book breathe. Too close together and things feel muddied or crammed. Too far apart, and you’re wasting space.

For me, I went with Georgia 9pt font size, and 13pt line spacing. 

  1. After you get this set up, Select All. 
  2. Click the Paragraph tab on the right side of the screen and uncheck Hyphenate at the bottom of the panel. 

Tab Indents

Next, we need to set our tab indent. Tab a few of the paragraphs, if you haven’t already. 

The space of a tab should be around 5 characters wide. It can be a little less, but shouldn’t be much more. 

  1. Create your tab spacing by Selecting All text. 
  2. Click the Type dropdown at the top of the program. 
  3. Select Tabs
  4. Align the tab box over your text so you can measure 5 character spaces. 
  5. Click on the ruler in the area you feel is around 5 character spaces (usually just past the 0.25” mark). Your tabbed text should adjust to match this rule. 
  6. Click out of the Tab box. 


I like to add grids to my document so I can adjust everything to baseline, helping all the text align from one page to another. 

For Mac users, this is in the InDesign dropdown to the left of File. For PC users, it may be labeled as a Setting or Preferences dropdown, I’m not sure. 

When you find it, select Preferences → Grids.

Set the following:

  • Color: I set mine to Charcoal. Just don’t choose blue (all element boxes are blue).
  • Start: 0
  • Relative to: Top Margin
  • Increment Every: [Chosen Font Spacing pts]
  • View Threshold: 75%

Save your settings. 

Creating Paragraph Styles

Now, let’s create a Paragraph Style which will carry throughout the document. 

  1. Click inside your text box. 
  2. Select All. 
  3. Look at the Toolbar running across the top of InDesign. You’ll see a dropdown menu which reads [Basic Paragraph]+
  4. Click the series of lines on the right of the dropdown. There are two stacked on top of eachother. You want the one where all the lines are matched up. This will line your text to the grid we created earlier.
  5. Next, on the left side of the dropdown labeled [Basic Paragraph]+, click the Paragraph symbol. 
  6. Select New Paragraph Style
  7. Name your Paragraph Style (I named mine Chapter Text). 
  8. Set Based On to Basic Paragraph
  9. Click OK. 

Now, your document is ready to begin layout. Let’s start with Chapter 1. 

Laying Out Your Book. 

Start with Chapter one. Determine how you want your chapter lead-ins to look. Grab a few books to flip through to get an idea of what other typesetters have done. Once you’ve made your choice, go to your Chapter 1 page and start laying it out. 

I like to create separate text boxes for the Chapter Header and Chapter Text

Chapter Header

Feel free to get creative with your chapter heading, change it to a different font from your Chapter Text or leave it the same. It’s completely up to you! 

  1. After you’ve styled your Chapter Header the way you want it, select the text. 
  2. Go to the paragraph symbol next to the [Basic Paragraph]+ dropdown and create a new Paragraph Style for your Chapter Headers. You’ll be able to use this to style your Chapter Headers moving forward.

Chapter Text

I usually start my chapter lead-in textbox about 5/8 to 1/2 down the page, and go to the edge of my margin. 

  1. Paste your Chapter 1 text in. All of it. You’ll notice, it won’t all fit. That’s okay. We will link text boxes across multiple pages. 
  2. Select All your text (ctrl+a). 
  3. Go to the Paragraph Style dropdown at the top and change [Basic Paragraph]+ to Chapter Text, if it doesn’t already say that. This will convert your text to the style we created earlier.
  4. Next, at the bottom of your blue text box, you’ll see a red + symbol. Click it. 
  5. Then, click at the top of the margin on the next page (pink line). This will create another text box, carrying the hidden text over. Repeat until Chapter 1 is laid out. 
  6. Repeat the above steps for the remaining chapters of your book, until you reach the end. 

The Finishing Touches

If you have extra pages after laying out your chapters, that’s great. You can easily delete them using the Pages tab on the right, and trash can symbol in the bottom corner of the tab. More likely, you’ve had to add pages. (And hopefully applied the B-Master style to them along the way). After laying out all your chapters, add the “closing” pages to your book: the acknowledgements page, glossary, etc. You can keep the B-Master styling or apply the blank A-Master styling, this is up to you.

Page Count

Look at your page number count. In order for your book to print, it has to be divisible by 4. If you can’t evenly divide your book by 4, you must add a few pages to make this happen. You can fill these pages with individual thank yous, sponsors, or a glossary of terms for your novel. 

Page Numbering

Earlier, we created our page number styling on the B-Master page and left it at that. To get the numbering to work as it should, we must return to our Pages tab on the right side of the screen. 

  1. Select the first page of Chapter 1, and then all the corresponding pages until the very end (or when you would like to stop tracking page numbers). 
  2. Right click on the blue pages and deselect Allow Document Pages to Shuffle. This will remove your ability to move pages out of order. It also makes it a pain to add new pages randomly. But, why would you want to do that? At this point, you shouldn’t need to. 
  3. Select the first page of Chapter 1 again. 
  4. Right click. Select Numbering & Section Options
  5. Click Start Page Number at: and set it to 1. 
  6. Click Ok. 

Chapter 1 should now start on page 1, and the subsequent pages should follow. 


Once you’ve completed your layout, you should print a copy of your book to review and markup. Use the directions below to submit a PDF for print. This helps you spot any issues you didn’t notice through the seemingly hundreds of rounds of edits you did before in Word. It’ll also help you spot any styling issues or errors you missed during typesetting. 

You can have proofs of your book printed through your printer, or you can print the document in spreads on 11×17 pages from a local print shop. It will be costly, but worth it. 

Time to Print

Once you’ve “proofed” your book and corrected any errors, export your book as a PDF from InDesign: 

  1. Click File → Export
  2. Name your document.
  3. Select Adobe PDF (print).
  4. Click Save. 
  5. At the top, in Adobe PDF Presets, select High Quality
  6. On the General Tab make sure All pages are selected. Export as Pages (not spreads). 
  7. On the Marks and Bleeds tab, select Use Document Bleed Settings. Don’t worry about anything else. Most printers, unless you’re doing single sheets, don’t need crop marks for books. 
  8. Click Export

You’re book is ready to send to your printer. 

As far as your cover, I suggest hiring a designer if you can afford one. It’s relatively easy to find one that works with your budget using the internet. Covers can range between $50-$500 depending on the designer you choose. (I typically do them for $150). A professionally designed cover can add value to your book, make you seem more professional as a writer, and draw attention to your work. But, if you can’t afford a cover designer, most printers have templates you can use. I know KDP has a few. Just remember to stay inside the margins and input the correct total page count into the template generator. 

I know this post contains a lot of information, but if all else fails, feel free to use the template I’ve made available for you to download. I’ve also included this post as a GoogleDoc for your printing convenience. 

There are also a lot of YouTube videos available to help you more. 

For more author design and marketing tidbits, follow my blog or subscribe to my newsletter. If you’re looking for a designer or typesetter to help with your next project, check out Copper Owl Press

Kaytalin Platt is an author and graphic designer living in Philadelphia, Pennsylvania. Raised in Deer Park, Alabama, a rural town north of Mobile, Platt enjoyed spending time in the surrounding woods and working on the family farm. Growing up on a farm gave Platt a peculiar set of skills, which she enjoys using on the random chance their needed–especially if it involves welding.

Platt’s mother contributed heavily to her passion for writing. They would listen to instrumental music, film scores mostly, and she challenged Platt to write down what she imagined happening as the music played. Platt’s love of music and writing only grew, and she began work on her first full-length novel during college. She worked on the novel, writing and rewriting, for nearly a decade before submitting it for publication in 2016. The Living God, Platt’s debut novel, was published in May 2019.

Currently, Platt is working on the followup to The Living God, and experimenting with stories on Wattpad, a reading platform home to over 80 million users.


Making an Audiobook

In the most recent episode of the Writing Bloc Podcast, hosts Becca Spence Dobias and Jacqui Castle speak with authors Tahani Nelson and Peter L. Harmon about their experience with the process of creating an audiobook!

We’ll go over the various routes for audiobook production available to indie authors, and discuss some experiences with each! Thanks for listening!


The Last Faoii by Tahani Nelson

The Happenstances at the Yellow County Community Swim and Racquet Club the Summer Before Last by Peter L. Harmon

ACX Audiobook Production


Overdrive (Ebooks and Audiobooks at Public Libraries)

LibriVox Free Public Domain Audiobooks

Audacity OpenSource Editing and Recording Software

Garage Band for Mac Recording and Editing Software

Thanks everyone, and happy writing. 


Chime in with resources, tips, tricks, and questions on one of our channels: SlackFacebook, and Twitter.

Author Interview News Promotions Reading Writing Life

Celia at 39 by Jason Pomerance- OUT NOW from Writing Bloc!

Writing Bloc is happy to announce the release of its first full length novel, Celia at 39 by Jason Pomerance. The book is a fun, fast paced romp through a woman’s journey to 40 and the surprises she finds along the way. Just like his beloved first novel, Women Like Us, the book features delectable food descriptions and poignant family moments. Barbara Abercrombie, author of A Year Of Writing Dangerously, calls Celia at 39 “wild, funny, and tender.”

We spoke to Pomerance about his new release!

What inspired your new book, Celia at 39?
A few years ago we were visiting my stepmother, who lives out by the beach at the tip of Long Island. Every year the little town library holds a book sale, and while perusing the stacks I found an old copy of The Gourmet Cookbook, which I know my mother had but the book had disappeared somehow. Anyway, I bought the library copy, and later when I leafed through it I noticed all these notations about recipes the former owner had written in the margins.  But the bigger thing was the note in an envelope tucked into the pages, from a daughter to her mom. I sort of obsessed about this note for a while and wondered about these two women, and somewhere around that time I read about a package that was mailed, got lost and then arrived at its destination like 40 years later. So somehow the two elements came together and became Celia At 39!

What kind of audience will it appeal to?  
I think women will take to it. But also hopefully men. The book is very much a romantic comedy, along the lines of something like Sweet Home Alabama or even Moonstruck (two movies I love) so if you liked those movies, I think you’ll like this book.

How does this book compare to Women Like Us?
Women Like Us was a bit more of a serious book.  It dealt with life and and death issues in some ways and this one doesn’t.  On the other hand, both are very much about family relationships. While the romantic stuff in Celia At 39 is important, so too is Celia’s relationship with her mom and two sisters.  I think anybody can relate to family members driving them nuts at times, and that’s what happens here — Celia’s sisters and mom and make her crazy but she knows she’s stuck with them for life.

Why did you decide to publish this book with Writing Bloc?
I had such great experiences with both the Escape! and Deception Anthologies that it just seemed logical to continue the relationship. And, frankly, I was humbled and honored that they wanted to publish it!  Everything about the process has been so great. Becca, Cari and Kendra were remarkably astute editors, and while it took us a while to get to the final cover, when I got the galley and held it in my hands for the first time, I couldn’t have been happier with the results.  Highly recommend Writing Bloc!

How was the process of writing a second novel different from that of writing a first?  
For me the process was pretty much the same — think about the story and characters endlessly until I can’t take it anymore and I just sit down and start writing.  I’m not a big outliner but more of a seat-of-the-pants style writer. I like to be surprised, and there were a few of them in this book, plot twists that even I didn’t even see coming  And then I’m a huge re-writer. I like to tinker endlessly until the book is finally ripped out of my hands and I’m told, “Stop! Enough!”

What advice do you have for people writing a second book?
I guess same advice to somebody writing a first book: write the story you want to tell. Don’t worry about anything else. Don’t worry if anybody else is going to like it, because there will always be some readers who like your work and some who don’t.  And just persist.  Writing, as we all pretty much know, can be heartbreaking and thankless, but somehow you just find a way to keep pushing forward. So that would be my best advice. Push forward and never give up.

Software Review

The Tools We Use: Aeon Timeline

When writing a novel, the fastest way to inconsistency is to lose track of your timeline. For some stories, the timeline can be simple, flowing in chronological order from a single character’s point of view. But for others, it can get mighty complicated. Think about all the interweaving threads of Game of Thrones, or the out-of-sequence time-hopping of The Time Traveller’s Wife.

There are a lot of ways you can track a timeline, and it doesn’t require dedicated software. It can be as simple as post-it notes on a wall, or an outline in a word processor, where each scene is captured in chronological order. If you’re feeling spicy, you might employ a spreadsheet. But, none of these options worked for me. Word documents made it too hard to visualize how different events interacted. Spreadsheets were a little better, but not great, and a pain to maintain. The classic post-it notes on a wall solved the visualization problem, but I don’t work in just one place, and it’s tricky to take the wall with me. So I went looking for tools to help.

What I found was Aeon Timeline.

The basic timeline screen of Aeon Timeline

Developed for writers, program managers, and legal practitioners, Aeon Timeline has become an integral part of my writing process.

Why I like it

I love Aeon Timeline for a few simple reasons:

  • Its flexibility.
  • Its visualizations.
  • Its ability to sync with manuscript projects.


Aeon Timeline has been designed to let you capture whatever you want, starting with the style of calendar: you can opt to work with real dates (at any point in the past, present, or future) or with relative dates/times (e.g., day 1, day 2, etc.). Working on a project set in a fantasy world with its own calendar? No problem. Define your personal calendar with its own eras, months, and weekdays. One weakness here is that out of the box, it only provides the Gregorian calendar (no Chinese, Bhutanese, Julian, Hebrew, Hijri, or Buddhist options as of yet).

Once you have your base calendar configured, you can set what you want to track. You can define the core properties used on events, and any number of “entities” that can be linked to events (such as characters, arcs, locations, etc.). For each type of entity you define, you can then determine what properties are captured about those entities. For example, characters can have a “Birth Date” that will allow the software to calculate and display the ages of any people linked to the event. Events can also be color-coded. The available colors, and the labels assigned to those colors, can be configured as well.

By now you’re probably getting the idea.

To you get started, the software comes with a bunch of pre-configured templates. The standard templates include things like fiction, project management, legal, historical, and screenplay, plus some more generic options. If you start using the software a lot and the existing templates aren’t quite right, you can create your own easily.

Aeon Timeline's new project templates.


Aeon Timeline only offers two views, yet its ability to visualize my timelines is a selling point. This is partly because those views are all I’ve needed, and partly because you can filter and configure those views to suit the circumstances.

The two views are “Timeline View” and “Relationship View.”

Aeon Timeline "Timeline View".
Screenshot saved from Aeon Timeline website:

Timeline View is your standard timeline, with each event drawn on its own row according to dates/relative times marked across the top. By default, each event is displayed as a colored line with an identifying label (ID, title, start and finish dates & times). You can expand an event to show a summary card, or select it to see all its information in a properties panel on the side. You can configure some basic settings for the main view (light or dark theme, hide IDs, etc.), but more importantly, you can set what is displayed on the summary cards. These cards can include any of the properties you’ve defined for the event and place them in one of two columns, making a bunch of information available at a glance. For example, I like to keep track of the moon phases and weather as properties of events to help me avoid inconsistencies. I’ve added these to the summary information, so I can instantly check what I’d said the weather was doing in a particular scene.

Expanded Summary Card in Aeon Timeline.

In addition to customizing the summary display, you can also group events by entities (e.g., by arc, character, or location) and filter events (by entity or property, such as character, location, weather, duration, tag, etc.). Filters can be multidimensional and saved for easy re-use.

Aeon Timeline screenshot showing collapsing groups. Screenshot saved from Aeon Timeline website:

The other built-in view is the relationship view. This lets you create a cross-reference table of entities against events. Events are displayed down the table in rows, and the entities you pick are displayed as columns, with color-coded symbols displayed on the intersections to show which events have those entities and what role they play. For example, it can provide a cross-reference of characters against scenes, making it easy to see if a character has mysteriously vanished for a while. Once again, you can group the information in the table and filter the results.

A screenshot of the relationship view in Aeon Timeline.

Project Synchronization

All this functionality is great, but at the end of the day, we need to write our manuscript (and our outline, if you’re like me). One of the pains of managing a timeline is when it comes to editing because you’re now handling the information in multiple places. Aeon Timeline attempts to alleviate this by providing built-in project synchronization with two popular manuscript tools: Scrivener and Ulysses. Connect your timeline to a project in one of these tools, and you get some cool abilities:

  • Selectively import scenes directly from your writing project to the timeline.
  • Link properties in your timeline to metadata in your project and sync the information (including start and end date/times).
  • Two-way sync connected events with your project (update your timeline with changes from the manuscript/outline and update the manuscript/outline with changes from the timeline).
Aeon Timeline syncing with a Scrivener project. Screenshot saved from Aeon Timeline website:


As I mentioned up top, Aeon Timeline isn’t the only way you ca. keep track of your story’s timeline. You can do it physically with sticky notes on a wall, or you could track it in a word/google doc file or a spreadsheet. If you use writing software like Scrivener, you could track it in scene metadata and create binder views to display the timeline of events. But when I set out looking for a tool, I had some specific requirements:

  • Simple tracking: I find keeping tracks of dates in spreadsheets or outline files cumbersome.
  • Visualizations: I hate looking at a table of dates and would much rather see a visual timeline of events to help me think through sequencing.
  • Minimal duplication: I didn’t want to be double entering information in my story bible, project, and timeline.


As I noted at the start of this article, Aeon Timeline advertises it is also a product for project managers and other professionals. I’m not making any representations as to the suitability of the tool for anything other than writing, as I haven’t used it for anything else.

Try it out

Aeon Timeline provide a free, twenty-day trial to see if you like the software. It’s available on Windows, macOS, and iOS. The developer has more information on their website, here.

Note: Aeon Timeline have offered members of the Writing Bloc a discount. Join our slack channel to get more details.


Have you used Aeon Timeline? We’d love to hear your thoughts/experiences with the tool: Do you like it? Do you still use it? What are the best and worst features? Join us in our Facebook group to discuss.

We also discuss Aeon Timeline on our latest podcast episode on World-building. You can listen to that by clicking here.


The author paid for their copy of Aeon Timeline. The Writing Bloc do not have a commercial relationship with the developers of Aeon Timeline and do not receive any referral incentives or commissions (nor have they asked for such).


Interview with Jackie Pulpit – Author of Questionable Morels

I’ve had the pleasure of knowing Jackie Pulpit since we were in a writers’ group together many years ago. Since then, Jackie has found great success in independent publishing under other names. Questionable Morels is the first in the Naturalist Selection cozy mystery series, starring protagonist Fern Rivers. Fern must question everything she knows to be true after a mysterious death rocks her small metropark community.

I loved the book, so I wanted to ask Jackie a few questions about the upcoming release!

This is your cozy debut. How is this work different from other work you have written? Why did you choose to write a cozy? 

Aside from switching perspectives from third to first person, not too much about the writing and creation process changed for me. Stepping away from fantasy and sci-fi was refreshing, and I enjoy writing situational dialogue in a present-day mystery. The biggest difference was having to detail the plot from top to bottom. I’m a bit of a pantser, in that I usually have a general idea of what my story is going to be so I can keep things loose and free to change if necessary along the way. Mysteries need to be solved—pun intended—on the outline before the main character can do it themselves.

I chose to write my cozy series because of two reasons. One being my love of PBS mysteries: who doesn’t enjoy watching the likes of Hercule Poirot and Sherlock Holmes sniffing around for clues and solving complex murders in interesting settings? Two, because of a friend’s recommendation of the cozy genre. I’d never heard the term before that point. I researched it and fell in love.

Fern Rivers is a naturalist. What was your inspiration for this story world? How does the natural world inform your writing? 

My wife is the inspiration for Fern Rivers. They are alike in so many ways that I think she’s a bit weirded out by it. Nature, in general, informs my writing. My series takes place in the fictional town of Duskview, where Lake Erie, lush green forests, and a small, sleepy town are prominently displayed. The Cleveland Metroparks and its Emerald Necklace are a treasure trove of beauty and inspiration, and I feel that the cozy genre is lacking a focus on such a splendid setting. Having a naturalist as the sleuth protagonist is also a blast to explore. It helps that I’ve also been around outdoor education for two decades.

Fern has to work two part-time jobs to make ends meet, plus live with her ex-boyfriend. I personally enjoyed the inherent conflict that this situation added to the main murder plot. I also loved the giddy nerdiness of Fern’s ex, Alexander. What do you think readers will like about this story? 

Personally, I really hope readers will enjoy what I hope is a fresh take on this genre by exploring outdoor education and the strong female presence found in parks all around the world. I like to think that people will learn something about nature and the local wildlife of Northeast Ohio. I attempted what I hope is a unique approach to the recipes normally found in culinary cozies by providing original artwork of certain plants and wildlife mentioned in the novel. As for the nerdy ex-boyfriend, Alexander, I had so much fun writing him, and I intend to explore his character a lot more. In today’s society, I felt that having two Millennial ex-lovers living and working together made sense and had endless potential for conflict, growth, and hilarity.

What are your future plans for Fern? How will she grow (ha ha, see what I did there) in forthcoming stories? 

I did see what you did there. 🙂 Fern’s character will indeed grow, and I plan on throwing some particularly tricky mysteries her way in the next couple books. I have three books in total planned as of right now, along with a prequel short story. I’m going to tackle a budding romance, explore the unusual relationship between her and her ex, dive into painful family memory, and continue to introduce people to the natural world.

Questionable Morels will be released on September 3, 2019. Order your copy today!

News podcast

Approaching World-building: Part 2 (Writing Bloc Podcast)

On the most recent episode of the Writing Bloc Podcast, hosts Christopher Lee and Jacqui Castle continue their conversation on world-building, this time with featured award-winning fantasy authors Maximian Held and Joshua Robertson.

In this resource-heavy episode (be sure to jot down some of the great, free resources for world-building we discuss) we dive deep into the nuts and bolts of building a fictional world. Listen below as we discuss everything from drafting habits and organizational styles, to our favorite map-building software!


Joshua Robertson’s website:

Max Held’s work:

Aeon Timeline:


Visit Writing Bloc to sign up for our newsletter, find a copy of our short story anthology, “Escape,” and read detailed articles about the indie author experience:

Get your very own comfy Writing Goat T-shirt here:

Continue the conversation!

Chime in with resources, tips, tricks, and questions on one of our channels: SlackFacebook, and Twitter.